Home Page
Jewelry Store
Books & Videos
Jewelry Projects
FREE Tutorials
Global Travels
Send me an email

Inca Puño - Tools & Rings

Start with following tools and material: two flat-nose pliers, flat file, 3M ‘superfine’ sanding pad, an s-clasp, lots of jump rings, and a frisbee-golf disk serves as a mobile workbench. You can purchase pre-cut jump rings; you will need 19-gauge with a 3.9mm inside diameter and 5.75mm outside diameter. If you want to craft your own jump rings, you will need 19-gauge round wire, side-cutters, knitting needle mandrel, and an optional 3.6-volt electric screwdriver speeds the coil wrapping operation. Inca Puño supply kits available.

Copyright © 2002-2008 Scott David Plumlee, all rights reserved